Date: Fri, 10 Apr 1998 12:06:48 +0100
From: pmk@juno.com (Patrick M Kvitkauskas)
To: qrp-l@Lehigh.EDU, jacksonharbor@worldnet.att.net
Subject: [7913] Sierra / KC2 owners, program your keyer WB9KZY software ?
Message-ID: <19980410.120649.8822.0.pmk@juno.com>

I someone has a simple way to program there KC-2 keyer it would
be nice to know ?

Just got done with programming my KC-2 with the WB9KZY program.
Had to put in addresses foe EOM and RW. Wasn't to bad figuring
it out.

I haven't changed anything on the interface but did pick off the
collector of Q4. Just soldered a 820k resistor on the top side
of the board for the signal return or sidtone output of the KZY
keyer.

I used a colon ( : ) for the EOM and a less than ( < ) for RW
Just put these lines in with a editor if you have the program.

a(58, 1) = &H7C ' : (eom)
a(60, 1) = &H4F ' < (rw)

a(58, 2) = 6 ' : (eom) 6
a(60, 2) = 6 ' < (rw) 6

Put them in there respective places. I put them in numeric
order and don't know if it would matter or not so I did it anyway.

Just got off the phone with Chuck Olson WB9KZY who graciously helped
me the first time and said it would be no problem sharing the program.
He will be setting up a web site soon to download the software. He said
he didn't mind if I shared it with others on the list so if you are
interested
send me a note which way you would like it (basic or compiled( .EXE ) ) .


Have fun es 72/73
de Patrick KD4OBQ

AR